Home > Hp Psc > Hp 1210 Check Print Cartridge Error

Hp 1210 Check Print Cartridge Error

Contents

Here is a much more in depth cleaning procedure, that may helpOpen the cartridge access door.Remove the cartridge on the right.Close the cartridge access door.If the On/Resume light starts blinking, the I have no clue what could have changed. The rear access door might not be closed or is not locked into place. If the product is unresponsive for more than 60 seconds, continue to the next solution. http://upintheaether.com/hp-psc/hp-psc-1210-check-print-cartridge-error.php

caution: Do not remove jammed paper at this stage. Z7_M0I02JG0KONJ30ACBBF8MM1084 hp-hero-support-search Actions ${title} Loading... I went to print something as I would usually and the "CheckPrint Cartridge" light starts flashing red and the "E" next to "Copies" comes on. If these steps resolved the issue, you do not need to continue troubleshooting. http://support.hp.com/us-en/document/c00094661

Hp Psc 1350 Check Print Cartridge

Reconnect the power cord to the power module. You might also experience the following symptoms: The product will not print. Figure : Disconnect the power cord Wait 15 seconds. Removing and reseating the cartridges might help.

Ink of all three colors could be seen flowing from the cartridge ink head so that's not the issue. Do not print on paper with paper clips or staples attached. Issue: The On/Resume light blinks rapidly for 20 seconds, and then remains on In this error condition, the following blinking lights pattern displays on the control panel: On/Resume light: Blinks rapidly Hp Psc 1410 Check Print Cartridge Flashing note: If the page displays in the wrong country/region or language, click the Region - Language link in the upper right corner of your browser.

The cartridges were last changed two weeks back.Please help. Hp Psc 1315 Check Printer Cartridge Error If the issue persists, continue to the next step. When only the On/Resume button () is blinking, release both buttons. http://h30434.www3.hp.com/t5/LaserJet-Printing/hp-psc-1210-all-in-one-cartridge-error/td-p/3711944 Expert: Dustin replied4 years ago.

If the On/Resume light () does not blink, replace the black cartridge. How To Reset Hp Psc 1410 Printer Doing so can cause bad electrical connections, clogged ink nozzles, or poor print quality. Privacy Policy © Copyright 2016 HP Development Company, L.P. Place it in its slot at a slight angle, and then press up and forward until the cartridge snaps into position.

Hp Psc 1315 Check Printer Cartridge Error

Figure : Insert the cartridge Firmly push the cartridge in until it snaps into place. Bought new carts. Hp Psc 1350 Check Print Cartridge Figure : Open the cartridge access door Without turning off the product, disconnect the power cord from the rear of the product. Hp Psc 1210 Troubleshooting If the product successfully turns off, press the On/Resume button () to turn on the product, and then press the appropriate button(s) on the product again to perform the intended task.

If the alignment page does not print automatically, follow these steps to print one manually: If the product is off, press the On/Resume button () to turn on the product. http://upintheaether.com/hp-psc/hp-psc-1210-check-cartridge-error.php After I submitted the request for help I got the thing to work. Reconnect the power cord to the rear of the product. Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content ‎08-03-2011 06:50 PM I tried your solutions.my computer has been doing this Hp Psc 1350 Troubleshooting

Open the cartridge access door and wait a moment for the cartridges to come to the center. Damaged or dirty paper rollers. Thank you for posting on the HP Forums. Check This Out Solutions Solution one: Turn the All-in-One off and then on again Follow these steps to turn the product off and then on again.

It's the best source for what your looking for. Hp Psc 1350 Error Code E Just send me a reply. The alignment page prints.

The carriage moves to the center of the product.

If this does not correct the problem, move onto Section 2.Step 1Turn on the printer and open the cover where the ink cartridge is located. If these steps resolved the issue, you do not need to continue troubleshooting. Follow these steps to determine which cartridge is defective, and then remove and replace that cartridge. Hp Psc 1350 Manual The sequence must be completed within ten seconds.

Doing so can cause bad electrical connections, clogged ink nozzles, or poor print quality. Of course, when I remove the color cartridge I get good black printing ok. Figure : Disconnect the power cord Unplug the power cord from the electrical outlet, power strip, or surge protector. http://upintheaether.com/hp-psc/hp-psc-1210-error-check-print-cartridge.php Showing results for  Search instead for  Do you mean  or Post new question Question Reply Topic Options Subscribe Mark Topic as New Mark Topic as Read Float this Topic to the

An alignment page prints automatically. note: If the carriage does not move into the access area, turn the product off and then on again. Figure : The location of the carriage contacts Figure : The gold-colored electrical contacts inside the carriage Wait about ten minutes to allow the electrical contacts to dry, or use a Clean the print cartridge contacts.