Home > Hp Designjet > Hp Designjet 5000 Error

Hp Designjet 5000 Error


The chance of this error appearing is less than 0.5% and there is nothing wrong with the Printer. Corrective Action: Try the following: Unplug the Printer, remove the HDD cover and check that the two cables (a flat one and the power cable) are connected. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Corrective Action: Re-boot the Printer and the error code should not appear again. Check This Out

System Error: 06030C Problem Description: Bad Line Sensor. If the error continues, call HP for technical support to troubleshoot the problem. It always happens during initialization, while checking the Printhead Cleaners. Which software application the customer is using (name, version, etc.). http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpp03771

Hp Designjet 5500 Error Codes

Anmelden Teilen Mehr Melden Möchtest du dieses Video melden? Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers Follow the steps listed below to determine the actual cause of the error and to replace the necessary parts.Parts required (part numbers are subject to change) Part description 5000 Series Models top System Error 0A0050 (non-continuable) Explanation An ink leak in the Tubes System has been detected.

Press ENTER to get the message ”No media profiles available”. Attempt to verify functionality. Check the empty slots to see if they need cleaning. Hp Designjet 5500 Printhead Error Codes System Error: 010041 Problem Description: Error in Scan-axis Encoder quadrature.

Follow up: If you have an error code which is not documented in this Service Manual or you have an error which you cannot resolve, then report the error to the Hp Designjet 5500 Printhead Reseat Error Click here for information on contacting HP Customer Care. If the error persists, upgrade the printer firmware (if upgrade is available). http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpp03891 Press the TOP key (to return to the main menu).

If the error persists, upgrade the printer firmware (if upgrade is available). Hp 5500 Printhead Problems You can change this preference below. Click here for information on contacting HP Customer Care. The update process sends a special file to the printer.

Hp Designjet 5500 Printhead Reseat Error

Connect a New Aerosol Fan (comes with the new Right Cover) to the Main PCA and power ON the Printer. http://www.computercarefiles.com/TWI_Docs/bpp90138/default.html In this case the customer should contact his/her IT support. Hp Designjet 5500 Error Codes If there is ink leakage, replace ALL Ink Cartridges, the APS ( Page 8-65) and the Tubes System ( Page 8-25). Hp Designjet 5500 Service Manual Corrective Action: Try the following: Check all the cables of the APS and make sure they are correctly connected and are NOT damaged.

If no error appears, try to print a file (problem is resolved if printer prints the file with no error). his comment is here Place the lens back into the printer’s top cover for use at a later time. None Insert There is no Ink Cartridge or printhead installed. If the error persists, upgrade the printer firmware (if upgrade is available). Hp Designjet 1050c Error Codes

System Error: 0B0009 Problem Description: Unable to detect Aerosol Fan (in the Right Cover). top System Error 0B000A (non-continuable) Explanation Primer shutdown error. It happens normally in new printers and only once (it is unlikely to happen again). this contact form Using this procedure you will be able to determine exactly which component failed.

Please try the request again. Hp Designjet 5000 Service Manual System Error: ffff ffff 031609xx Problem Description: This error code only appears if the Main PCA was replaced without removing the media from the Printer, because the firmware tries to find top System Error 01002D (non-continuable) Explanation The Main PCA cannot communicate with the Carriage Recommended action Turn the printer off (using the power switch at the back of the printer), wait

XX06 Replace The printer detects an incorrect printhead cleaner.

NOTE: The Designjet online website may require website registration to access online Media profiles. top System Error 0D0002 (continuable) Explanation Insufficient memory to initialize HP-GL2/RTL Recommended action Minimum required memory is 96 MB. Very helpful Somewhat helpful Not helpful End of contentUnited StatesHP WorldwideStart of Country / Region Selector contentSelect Your Country/Region and LanguageClick or use the tab key to select your countryArgentinaAustraliaBelgiqueBoliviaBrasilCanadaCanada-françaisČeská republikaChileColombiaDeutschlandEcuadorEspañaFranceIndiaIrelandItaliaMagyarországMéxicoNew Hp Designjet 5500 Manual Pdf top Reseating, adding memory Turn the printer off using the main power switch on the back of the printer.

If the Scan-Axis is OK also, then replace the Drop Detector ( Page 8-70) or the Service Station Assembly ( Page 8-67) and recalibrate the Printer. When the READY message is displayed on the front-panel, scroll to the Printer Setup Options icon and press the Enter key. If the message persists, replace the printhead(s). navigate here Diese Funktion ist zurzeit nicht verfügbar.

Figure 4: Releasing locking tabs 1 - Lower locking tab 2 - Upper locking tab Remove the memory, taking care not to drop the DIMM(s). This error code appears when the printer detects that the same areas of nozzles do not work in different printheads. Before calling, please do the following: Review the following troubleshooting suggestions: Read the relevant driver documentation supplied with this printer (for users sending PostScript files or those using Windows). If the issue re-appears, replace the Main PCA and the HDD Controller (which connects to the new Main PCA).

top System Error 0B000C (non-continuable) Explanation Serial Device ADC test failure. Schließen Weitere Informationen View this message in English Du siehst YouTube auf Deutsch. Disconnect the data cable from the printer (network or parallel).