Home > Hp Designjet > Hp 5500 Error

Hp 5500 Error

Contents

Attempt to manually recover the printheads: Using the Arrow keys, scroll to the Printhead menu (the Printhead icon is on the lower right corner of the front panel display) and press Remove the DIMM access cover (four T-10 screws) from the back of the printer. If the error continues, call HP for technical support to troubleshoot the problem. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. http://upintheaether.com/hp-designjet/hp-5500-error-messages.php

Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Continue to hold down the DOWN ARROW and the TOP key until the front panel display shows a list of four selections. Hinzufügen Möchtest du dieses Video später noch einmal ansehen? Hinzufügen Playlists werden geladen... my response

Hp Designjet 5500 Service Manual

If the error re-appears, call HP for technical support to troubleshoot the problem. Press the TOP key (to return to the main menu). Recommended action Turn the printer off, using the main power switch located on the back of the printer.

Select the appropriate 5500 series model. Wird geladen... Über YouTube Presse Urheberrecht YouTuber Werbung Entwickler +YouTube Nutzungsbedingungen Datenschutz Richtlinien und Sicherheit Feedback senden Probier mal was Neues aus! Return to TWI Documents Library Index Page HP Designjet 5500 Series Printers - Eaglejet TWI: System Error 0C0040 In this document: Support Center Agents (Troubleshooting to be performed with customer) Parts Hp 5500 Printhead Problems If the error continues, call HP for technical support to troubleshoot the problem.

Wird geladen... Hp Designjet 5500 Printhead Reseat Error Before calling, please do the following: Review the following troubleshooting suggestions: Read the relevant driver documentation supplied with this printer (for users sending PostScript files or those using Windows). The possible causes are either fibres or a piece of paper in the Drop Detector or that the Scan-Axis reference is incorrect 50 Designjet 5000 / 5500 0C00FF error Print Mask Highlight and select Upgrade Firmware.

Ensure the clear plastic tube is connected and not kinked in any way. Hp Designjet 5000 Service Manual If the problem persists following the upgrade, replace the lens cover: Scroll to the Printer Setup Options icon and press the Enter key. Recommended action Press ENTER on the printer's front panel to continue. If the error continues, call HP for technical support to troubleshoot the problem.

Hp Designjet 5500 Printhead Reseat Error

Recommended action Turn the printer off (using the power switch at the back of the printer), wait 20 minutes and turn the printer on (condensation may be causing error and the top System Error 010090 (continuable) Explanation An error has occurred in the Paper-axis Motor Encoder. Hp Designjet 5500 Service Manual Click here for information on contacting HP Customer Care. Hp Designjet 1050c Error Codes If no error occurs, plug the network cable back into the network card and attempt to print (problem may have been caused by receiving information through the port during the power

Scroll to the necessary menu (Service Tests, Service Utilities, or Service Calibrations) and press ENTER. http://upintheaether.com/hp-designjet/hp-5500-error-codes.php ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection to 0.0.0.10 failed. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. NOTE: Before troubleshooting System Errors, if possible, repeat the procedure performed when the error was reported. Hp Designjet 5500 Printhead Error Codes

top Upgrading the system software (firmware) CAUTION: Before performing the firmware upgrade, make sure that the media is unloaded from the printer. The printer front panel display will indicate the progress of the firmware upgrade. If the error continues, call HP for technical support to troubleshoot the problem. Check This Out due to a temporary loss of tension).

If any of the printers are out of date, the application will prompt an update. Hp Designjet 5500 Manual Pdf Transkript Das interaktive Transkript konnte nicht geladen werden. Wird verarbeitet...

Select the appropriate 5500 series model.

If the error continues, call HP for technical support to troubleshoot the problem. The type of interface used on the printer (parallel or network). If the error re-appears, call HP for technical support to troubleshoot the problem. Hp Laserjet 5500 Error Codes Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on.

If the error continues, call HP for technical support to troubleshoot the problem. If the error persists, call HP for technical support to troubleshoot the problem. Remove media and re-boot the printer. 6 Designjet 5000 / 5500 ffff ffff 03450097 error If the Window is opened during the cutting operation, the Printer hangs and the Carriage suddenly http://upintheaether.com/hp-designjet/hp-designjet-5500-error.php Click media profiles.

A 24 or 36-inch roll of media may be cut to 60 or 42 inches long and used for this procedure. top System Error ffff ffff 03450097 Explanation The Top cover was opened during the cutting operation, the printer hangs and the Carriage suddenly stops. Using a lint-free cloth lightly dampened with water, clean the Mark encoder located on the drive roller (small white rectangle attached to the left-side of the large black drive roller). Recommended action Turn the printer off (using the power switch at the back of the printer).

Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Click here for information on contacting HP Customer Care. Remove and re-install all six ink cartridges and press ENTER to continue. Scroll to Replace ink cartridges and press ENTER.

Unload the media and turn the printer off and back on using the main power switch at the back of the printer. The application will analyze each of the printers that are configured for the computer and report on its current state. Click here for information on contacting HP Customer Care. Turn the printer on and attempt to print.

The location should now be C:\Program Files\Hewlett-Packard\HP Designjet System Maintenance. Replace any out of warranty or faulty print heads. HP Designjet 5500PS From C:\Program Files\Hewlett-Packard\HP Designjet System Maintenance, type copy /b DJ5500PS_Axxxx.FMW LPT1 (the xxxx refers to the most current firmware revision). Turn the printer on.

Your cache administrator is webmaster. Click here for information on how to replace the Lens cover . Press the TOP key (to return to the main menu). Click here for information on contacting HP Customer Care.

If requent, upgrade firmware to A.02.xx 3 Designjet 5000 / 5500 ffff ffff 01dcxxxx error There is a problem with the I/O Card (happens during power up) 4 Designjet 5000 / Click here for information on contacting HP Customer Care. Reseat or add memory (if needed). Following initialization, verify recognized memory through the front panel (Printer Setup, Utilities, Statistics, RAM present=).